Depending on which Siemens KNX device you want to update, you need either the Firmware Download Tool V4 or V5.
The update is carried out via the KNX bus.
System requirements:
- WinXP 32Bit, Vista 32Bit,
Win7 32Bit, Win7 64Bit, Win8 64Bit, Win10 64Bit
- PC with LAN or/and USB Port
- KNX Interface (USB or IP)
- Installed ETS 3.0f, ETS4 or Falcon 2.x
Overview of KNX-Interfaces for Firmware Download Tool V4
Interface N 148/12 USB
|
5WG1 148-1AB12 |
 |
IP-Interface N 148/22 |
5WG1 148-1AB22 |
 |
Interface OCI702 USB |
S55800-Y101 |
 |
Interface N 148/11 USB
|
5WG1 148-1AB11 |
 |
IP-Interface N 148/21 |
5WG1 148-1AB21 |
 |
Interface N 148/01 RS232 |
5WG1 148-1AB01 |
 |
Interface N 148/02 RS232 |
5WG1 148-1AB02 |
 |
Updateable devices with Firmware Download Tool V4:
KNX / DALI Gateway
N
141/01 |
5WG1 141-1AB01 |
KNX / DALI Gateway
N
141/02 |
5WG1 141-1AB02 |
KNX / DALI Gateway Twin plus
N
141/21 |
5WG1 141-1AB21 |
KNX / DALI Gateway Twin
N
141/31 |
5WG1 141-1AB31 |
OPTISENS OFFICE Presence Detector UP 258D11 |
5WG1 258-2DB11 |
OPTISENS OFFICE Presence Detector UP 258E11 |
5WG1 258-2EB11 |
OPTICONTROL OFFICE Presence Detector UP 258E21 |
5WG1 258-2EB21 |
Combi sunblind actuator N 501/01 |
5WG1 501-1AB01 |
Load switch N 512/01 |
5WG1 512-1AB01 |
Switching actuator, main module N 512/11 |
5WG1 512-1AB11 |
Venetian blind actuator N 523/04 |
5WG1 523-1AB04 |
Venetian blind actuator N 523/11 |
5WG1 523-1AB11 |
 |
|
Titel |
Download |
Firmware Download Tool V4
(Setup file)
(Released: 14. Sep. 2015) |
|
Firmware Download Tool V4
(Manual) |
|
|
This software is subject to the License Agreement included; please read this agreement carefully and confirm your approval by clicking the button at the end of the pop-up page. |
Version details: